MedElevator Войти в исследования
← Поиск публикаций

DOI 10.1016/j.jhazmat.2013.01.001

Медицинская библиотека · Journal of hazardous materials · 2013

Removal of Cr(VI) from aqueous solution by flocculant with the capacity of reduction and chelation.

Wang Gang, Chang Qing, Han Xiaoting, Zhang Mingyue

СтатьяПоддержка исследования: вне правительства СШАПеревод в очереди

Аннотация

A novel agent polyethyleneimine-sodium xanthogenate (PEX) with the multifunction of reduction, chelation, flocculation and precipitation was synthesized by using polyethyleneimine (PEI), carbon disulfide (CS2), and sodium hydroxide (NaOH). The effects of different important parameters, such as pH value, initial Cr(VI) concentration, coexisting ions and turbidity etc., on the removal of chromium from aqueous solution by PEX were investigated in flocculation experiments. The experiments results demonstrated that PEX could efficiently remove Cr(VI) and total Cr (Cr(VI)+Cr(III)) in strongly acidic media. It was proved that the presence of coexisting ions (Na(+), Ca(2+), F(-), Cl(-), and SO4(2-)) in the solution had a little influence on the removal of chromium. Furthermore, it was conformed that Cr(VI) ions and turbidity could be simultaneously removed when water samples contained both Cr(VI) ions and turbidity. Finally, the mechanism of interaction between chromium and PEX was further confirmed by Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). The results reveal that dithiocarboxylic acid groups on PEX macromolecule play a major role in Cr(VI) reduction and Cr(III) chelation, and the flocs formation is attributed to the interparticle bridging mechanism of PEX.

Для цитирования: Wang Gang, Chang Qing, Han Xiaoting, Zhang Mingyue. Removal of Cr(VI) from aqueous solution by flocculant with the capacity of reduction and chelation.. Journal of hazardous materials. 2013. DOI: 10.1016/j.jhazmat.2013.01.001.

Предметные рубрики MeSH

Подготовка и перевод публикации
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

Тип публикации указан по данным источника. Уровень доказательности автоматически не присваивается.