Coagulation characteristic and mechanism of Fe(III) salts toward typical Cr(III) complexes in wastewater treatment.

Cr(III) complexes are typical pollutants in various industrial wastewater and pose a serious threat to the ecosystem and humans. The coagulation process is commonly used in water treatment plants, yet its removal characteristic and mechanism toward Cr(III) complexes have been rarely reported. In this study, the Fe(III) coagulation process was adopted for the evaluation of Cr(III) complex removal in terms of Cr residual concentration as well as floc size. The results showed that Fe(III) with a dose of 0.8 mM removed more than 80% of total Cr for Cr3+ and Cr(III)-acetate, whereas poor removal rate (~ 50%) was obtained for Cr(III)-citrate under the same conditions. Neutral and alkaline conditions facilitated Cr(III)-acetate removal by Fe(III) coagulation, while limited influence was observed for Cr(III)-citrate with various pH. The main removal mechanism of Cr(III)-acetate was precipitation. Cr(III)-citrate elimination largely relied on the adsorption property and sweeping effect of Fe floc. Moreover, Cr(III)-acetate was easier to be separated from a solution since the generated floc sizes were 270 μm. Flocs that formed in the Cr(III)-citrate treatment were only 0.3 μm, resulting in separation difficulties during the coagulation process. The presence of Cr(III)-acetate and Cr(III)-citrate caused a significant decline in membrane flux. This study provided fundamental knowledge of Fe coagulation treatment in Cr(III) complex-containing wastewater.