Identifying Antimicrobial Agents from Chlorella sorokiniana: A Biotechnological Approach Utilizing Eco-Friendly Extraction and Characterization Methods.

Natural compounds are increasingly favored over synthetic ones for their lower environmental impact. However, extraction and characterization processes typically rely on harsh conditions and conventional solvents, which are unsustainable and cause pollution. This study aimed to develop an eco-friendly extraction method to isolate and evaluate the antimicrobial properties of bioactive compounds from Chlorella sorokiniana. Using dimethyl carbonate (DMC), methoxycyclopentane (CPME), and butan-2-one (MEK) as green solvents alongside chloroform as a non-green reference solvent, on both untreated and sodium hydroxide pre-treated microalgae biomass, extract yields of up to 182 ± 27 mg/g DW were obtained using MEK. Extracts from untreated microalgae biomass exhibited lower MIC values compared to those obtained with the same solvent from pre-treated biomass, when tested as antimicrobial agents against Escherichia coli, Bacillus megaterium, and Bacillus subtilis. The lowest MIC value (4.89 ± 0.05 µg/mL) was observed against E. coli using the extract from the untreated microalgae biomass with CPME, which was comparable to the vancomycin control (1.55 ± 0.03 µg/mL). Principal component analysis highlighted correlations between GC-MS-identified compounds and antimicrobial activity. ANOVA and post hoc tests (p < 0.05) confirmed solvent choice, and pre-treatment influenced yield and bioactivity. The results underscore green solvents as sustainable alternatives for extracting bioactive compounds from autotrophic microalgae.