MedElevator Войти в исследования
← Поиск публикаций

DOI 10.1038/s41598-022-05153-7

Медицинская библиотека · Scientific reports · 2022

The composition of the fluid phase in inclusions in synthetic HPHT diamonds grown in system Fe-Ni-Ti-C.

Sonin Valeri, Tomilenko Anatoly, Zhimulev Egor, Bul'bak Taras, Chepurov Aleksei, Babich Yuri, Logvinova Alla, Timina Tat'yana, Chepurov Anatoly

СтатьяПеревод в очереди

Аннотация

Diamonds grown by high pressure high temperature process (HPHT) are usually characterized by yellow color and high contents of nitrogen. Introduction of Ti decreases nitrogen content in diamond. Understanding the formation of nitrogen-poor diamond is very important not for the progress of HPHT process only, but because these diamond varieties represent the rare natural stones, although their crystallization conditions have not been clarified yet. Here we studied the composition of fluid phase in synthetic diamonds. The experiments were performed using a high-pressure apparatus BARS at pressures 5.5-6.0 GPa and temperatures 1350-1400 °C. It was found that introduction of metallic Ti leads to concentration of nitrogen mainly as nitrogenated hydrocarbons. The hypothesis that elucidates the formation of low-nitrogen diamond in Fe-Ni is proposed: the presence of Ti leads to an increase of hydrogen fugacity in the metal melt which drastically reduces the nitrogen solubility. As a result, nitrogen concentrates in the form of complex hydrocarbon compounds, while diamond grows colorless and characterized by very low nitrogen content. It is suggested that the proposed mechanism acts the same way in the presence of other metals which are strong reducing agents.

Для цитирования: Sonin Valeri, Tomilenko Anatoly, Zhimulev Egor, Bul'bak Taras, Chepurov Aleksei, Babich Yuri, Logvinova Alla, Timina Tat'yana, Chepurov Anatoly. The composition of the fluid phase in inclusions in synthetic HPHT diamonds grown in system Fe-Ni-Ti-C.. Scientific reports. 2022. DOI: 10.1038/s41598-022-05153-7.
Подготовка и перевод публикации
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

Тип публикации указан по данным источника. Уровень доказательности автоматически не присваивается.