High efficiency Cu2MnSnS4 thin film solar cells with SnS BSF and CdS ETL layers: A numerical simulation.

The quaternary compound copper manganese tin sulfide Cu2MnSnS4 is a potential absorber semiconductor material for fabricating thin film solar cells (TFSC) thanks to their promising optoelectronic parameters. This article numerically investigated the performance of Cu2MnSnS4 (CMTS)-based TFSC without and with tin sulphide (SnS) back surface field (BSF) thin-film layer. First, the impact of several major influential parameters such as the active material's thickness, doping concentration of photoactive materials, density of bulk and interface defect, working temperature, and metal contact, were studied systematically without a BSF layer. Thereafter, the photovoltaic performance of the optimized pristine cell was further investigated with an SnS as BSF inserted between the absorber (CMTS) with a Platinum back metal of an optimized heterostructure of Cu/ZnO:Al/i-ZnO/n-CdS/p-Cu2MnSnS4/Pt. Thus, the photoconversion efficiency (PCE) of 25.43% with a J SC of 34.41nullmA/cm2 and V OC of 0.883 V was achieved under AM1.5G solar spectrum without SnS BSF layer. Furthermore, an improved PCE of 31.4% with a J SC of 36.21nullmA/cm2 and V OC of 1.07 V was achieved with a quantum efficiency of over 85% in the wavelengths of 450-1000 nm by the addition of SnS BSF layer. Thus, this obtained systematic and consistent outcomes reveal immense potential of CMTS with SnS as absorber and BSF, respectively and provide imperious guidance for fabricating highly a massive potential efficient solar cell.