MedElevator Войти в исследования
← Поиск публикаций

DOI 10.1002/bmc.70491

Медицинская библиотека · Biomedical chromatography : BMC · 2026

Simultaneous Determination of Six Inorganic Anions in Animal Whole Blood Using Ion Chromatography With Suppressed Conductivity Detection.

Dhanik Babita, Khandelia Pallavi, Paliwal Aakanksha, Patil Ketan

СтатьяПеревод в очереди

Аннотация

A sensitive and robust ion chromatography method with suppressed conductivity detection (IC-CD) was developed and validated for the simultaneous quantification of six inorganic anions (fluoride, nitrite, bromide, nitrate, phosphate, and sulfate) in animal whole blood. The method employed a carbonate-bicarbonate eluent (4.5-mM Na2CO3, 0.8-mM NaHCO3) at a flow of 1 mL/min and an anion-exchange column (4 × 250 mm, Dionex IonPac AS23 RFIC) to achieve baseline resolution of all analytes within a 30-min run. Sample preparation involved protein precipitation with ice-cold methanol followed by centrifugation, dilution, and filtration. The method demonstrated excellent linearity (R2 = 0.9974-0.9998), with limits of detection (LODs) ranging from 0.27 to 2.96 mg/L. Accuracy was confirmed through recovery studies, yielding values between 99.4% and 118.2%. Intraday and interday precision, expressed as relative standard deviation (%RSD), was consistently below 10% for both peak areas and retention times. The developed IC-CD protocol offers several advantages over existing techniques, including minimal sample volume, simplified sample preparation, rapid analysis, and high reproducibility. This method provides a valuable application tool for assessing ionic balance, nutritional status, and environmental exposure in animal health monitoring and toxicological studies.

Для цитирования: Dhanik Babita, Khandelia Pallavi, Paliwal Aakanksha, Patil Ketan. Simultaneous Determination of Six Inorganic Anions in Animal Whole Blood Using Ion Chromatography With Suppressed Conductivity Detection.. Biomedical chromatography : BMC. 2026. DOI: 10.1002/bmc.70491.

Предметные рубрики MeSH

Подготовка и перевод публикации
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

Тип публикации указан по данным источника. Уровень доказательности автоматически не присваивается.