An Integrated IoT-Based Multi-Sensor Framework for Real-Time Indoor Environment and Safety Monitoring.

Poor indoor air quality, inadequate ventilation, and unnoticed local disturbances can reduce occupant well-being and compromise practical safety in smart-home and small-building environments. Although low-cost Internet-of-Things (IoT) sensing technologies are widely available, many monitoring systems remain focused on single-modality sensing and do not jointly evaluate environmental conditions, vibration activity, communication reliability, and gateway-side interpretation within one framework. This study presents the design, implementation, and proof-of-concept evaluation of a low-cost, privacy-conscious, non-imaging IoT-based indoor environment and safety-awareness monitoring framework built with ESP32/Arduino sensor nodes and a Raspberry Pi gateway. The system integrates carbon dioxide, temperature, humidity, gas-resistance/VOC-trend indication, and vibration sensing with MQTT-based communication and edge-side analytics. Controlled subsystem experiments showed that CO2 concentration differentiated ventilation conditions, increasing from 395.47 ppm in the valid empty/open-door baseline to 1083.16 ppm in the closed occupied condition. Vibration states were distinguished using root-mean-square acceleration features across calm, surface-disturbance, footstep, play, and jump conditions. MQTT evaluation using 1000-message batches showed no observed message loss or duplicates across the tested QoS/network combinations, although latency and throughput varied by network configuration and QoS level. QoS 1 provided a practical balance between low latency and protocol-level delivery assurance in the tested local/Wi-Fi setting. A final integrated validation run further demonstrated synchronized acquisition from indoor environmental, vibration, and outdoor CO2 reference publishers through the same Raspberry Pi gateway, with zero missing or duplicate sequence flags across the three streams. Overall, the findings indicate that lightweight open-source IoT hardware can support a reproducible building-level sensing and edge-analytics prototype for indoor environment and safety-awareness monitoring. Broader deployment in standard-sized rooms, multi-room buildings, and smart-city infrastructure remains future work.