Constructing a Stabilized Interface in Ultra-High Nickel Single-Crystal LiNi0.90Co0.05Mn0.05O2 by a Long-Time Molten-Salt Route.
Аннотация
Based on its advantages of high specific capacity, excellent rate capability, and low cost, Nickel-rich layered oxide cathode materials LiNixCoyMn1-x-yO2 (Ni-rich NCM, x ≥ 0.9) have become a key choice for the new energy vehicle industry. During electrochemical cycling, however, multiple phase transitions-particularly the detrimental H2-H3 transformation induces abrupt anisotropic lattice distortion along the c-axis. This leads to the formation of microcracks within Ni-rich NCM, which results in the gradual degradation of capacity retention and thermal stability. This study reports an ultra-high nickel cathode material with an in situ stable rock-salt layer constructed on the surface. The NiO rock-salt layer can serve as a covering layer for the material, reducing its direct contact with the electrolyte. Additionally, due to the dispersed primary particles of single-crystal LiNi0.9Co0.05Mn0.05O2 cathodes (NCM90-S), anisotropic stress change is avoided, and crack formation is effectively suppressed during cycling, demonstrating exceptional cycle performance. Consequently, compared to polycrystalline LiNi0.9Co0.05Mn0.05O2 cathodes (NCM90-P), NCM90-S achieves superior capacity retention after 300 cycles at 1C (80.2% vs. 60.3%).
Подготовка и перевод публикации
Обработка статьи · этапы, ошибки и управление
Ошибки и ограничения
История · было → стало
Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.
Тип публикации указан по данным источника. Уровень доказательности автоматически не присваивается.