Adsorption characteristics of Barmer bentonite for hazardous waste containment application.

Low hydraulic conductivity and high chemical immobilization are the two characteristics that make bentonite a mandatory construction material for hazardous waste containment applications. We performed a comprehensive batch sorption study on Barmer bentonite (BB), an exclusive construction clay mined in India, using lead (Pb2+) as a model contaminant. The maximum adsorption capacity of BB was obtained as 55 mg g-1 at pH 5 and 27 ± 2℃. Adsorption was extremely rapid, with equilibrium attained <5 min for the BB. Increased adsorbent dosage resulted in higher Pb2+ percentage removal, while adsorption capacity decreased. Ionic strength, salt concentration, valency and ionic radius played a critical role in suppressing the adsorption of Pb2+. Clay fabric change was observed to be dispersed at low ionic strength and gradually attained aggregated face-to-face structures at high ionic strength. The simultaneous presence of other metals/salts strongly influenced Pb2+ removal by BB, while divalent salt exhibited high suppression of adsorptive reaction at low concentrations. Sorption isotherm and kinetic modeling results indicated the possibility of chemisorption of Pb2+ on BB. Based on the thermodynamic analysis, it was noted that Pb2+ adsorption on BB is exothermic, spontaneous and adsorption reaction is less favorable at a higher temperature.