Synergistic Enhancement of Phenolic Hydroxyl Content in Lignin via Sequential Hydrothermal and Twin-Screw Extrusion Pretreatment Followed by Aqueous Ethanol Organosolv Extraction.

Lignin, the second most abundant polymer, remains largely underutilized, with nearly 90% of industrial lignin being combusted for energy due to its low phenolic hydroxyl content and structural heterogeneity of conventional extraction methods. The present study proposes a synergistic extraction method integrating sequential hydrothermal and twin-screw extrusion pretreatment followed by aqueous ethanol organosolv extraction. Three pretreatment strategies-hydrothermal pretreatment, twin-screw extrusion pretreatment, and sequential hydrothermal and twin-screw extrusion pretreatment-were compared. The sequential pretreatment exhibited the most favorable performance. Upon organosolv extraction, a lignin extraction rate of 67.9% was achieved, representing a 20.8% increase over that of the raw material. Extensive β-O-4' bond cleavage during the integrated process liberated phenolic hydroxyl groups. This elevated the total phenolic hydroxyl content to 3.43 mmol·g-1, representing a 63.3% increase relative to lignin derived from raw material. Concurrently, this bond cleavage yielded lignin with a narrower molecular weight distribution, indicating enhanced structural homogeneity. Additionally, cellulose retention after lignin extraction reached 88.9%. Mass-balance calculations indicated that 1000 g of raw material yielded 82.5 g of xylose and xylooligosaccharides, 148.2 g of highly active lignin, and cellulose-enriched solid residues, thereby facilitating the comprehensive utilization of the three primary components of lignocellulosic biomass.