3D kinematic analysis of the acromioclavicular joint during arm abduction using vertically open MRI.

Many researchers have evaluated the motions of the shoulder girdle, especially scapular and humeral motion. However, few reports exist that describe motions of the acromioclavicular joint. The purpose of the present study was to analyze the 3D kinematics of the acromioclavicular joint during arm abduction using 3D MR images obtained by a vertically open MRI. Fourteen shoulders of seven volunteers were examined in seven static positions from 0 degrees to the maximum abduction in a seated position. 3D surface models of the clavicle and scapula were created, and the movements of the acromioclavicular joint from 0 degrees to each position were calculated using the volume-based registration technique. From these calculations, the translations were evaluated and the rotational motions were analyzed using the concept of the screw axis. In the anteroposterior direction, the clavicle translated most posteriorly (-1.9 +/- 1.3 mm) at 90 degrees of abduction and most anteriorly (1.6 +/- 2.7 mm) at maximum abduction. In the superoinferior direction, the clavicle translated slightly superiorly (0.9 +/- 1.9 mm). When analyzing relative motion of the scapula with respect to the clavicle, the scapula generally rotated about a specific screw axis passing through the insertions of both the acromioclavicular and the coracoclavicular ligaments on the coracoid process. The average rotation was 34.9 +/- 8.4 degrees.