MedElevator Войти в исследования
← Поиск публикаций

DOI 10.1016/j.wasman.2020.03.005

Медицинская библиотека · Waste management (New York, N.Y.) · 2020

Stabilized landfill leachate treatment by zero valent aluminium-acid system combined with hydrogen peroxide and persulfate based advanced oxidation process.

Antony Jismy, Niveditha S V, Gandhimathi R, Ramesh S T, Nidheesh P V

СтатьяПеревод в очереди

Аннотация

The toxic leachate generated from landfills is becoming a major nuisance to the environment and has vital role in groundwater contamination. This study evaluated the potential of zero valent aluminium (ZVAl) based advanced oxidation processes (AOPs) for stabilized landfill leachate treatment. Hydrogen peroxide (HP) and persulfate (PS) were used to generate additional radicals in aerated ZVAl acid process. ZVAl-acid system achieved 83% COD removal efficiency under optimized conditions such as acid washing time of 20 min, ZVAl dose of 10 g L-1 at initial pH 1.5. The highest exclusion efficiencies in terms of TOC, COD as well as color were 83.52%, 96% and 63.71% respectively in treatment systems showing the following order: ZVAl/H+/Air/HP/PS > ZVAl/H+/Air/PS > ZVAl/H+/Air/HP > ZVAl/H+/Air > ZVAl/H+. The involvement of other metals such as Fe and Cu in the process has been found. The reusability study revealed that ZVAl powder can be effectively used up to three cycles. The 28.48 mg/l of Al3+ residue was observed in this process which has to be removed before discharge of effluent. The study indicated that the ZVAl based AOPs is stable and active for the degradation of organic pollutants present in landfill leachate and a promising solution except for the aluminium discharge which has to be given special care.

Для цитирования: Antony Jismy, Niveditha S V, Gandhimathi R, Ramesh S T, Nidheesh P V. Stabilized landfill leachate treatment by zero valent aluminium-acid system combined with hydrogen peroxide and persulfate based advanced oxidation process.. Waste management (New York, N.Y.). 2020. DOI: 10.1016/j.wasman.2020.03.005.

Предметные рубрики MeSH

Подготовка и перевод публикации
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

Тип публикации указан по данным источника. Уровень доказательности автоматически не присваивается.