MedElevator Войти в исследования
← Поиск публикаций
Медицинская библиотека · Journal of AOAC International · 2006

Determination of phenylephrine hydrochloride, chlorpheniramine maleate, and methscopolamine nitrate in tablets or capsules by liquid chromatography with two UV absorbance detectors in series.

Cieri Uco R

СтатьяПеревод в очереди

Аннотация

A procedure is presented for the simultaneous determination of phenylephrine HCI (PE), chlorpheniramine maleate (CM), and methscopolamine nitrate in commercial tablets or capsules by liquid chromatography (LC) with 2 UV absorbance detectors in series. Reference and sample solutions are prepared in methanol. LC separations are performed on a 7.5 cm Novapak silica column. The mobile phase is prepared by mixing 930 mL methanol with 70 mL of a 0.5% aqueous solution of 1-pentanesulfonic acid, sodium salt. The injection volume is 20 microL; the flow rate is approximately 1 mL/min. Retention times are approximately 1.5 min for PE, 3 min for CM, and 6 min for methscopolamine nitrate. One detector determines the first 2 compounds at 265 nm, but the third compound does not produce a detectable peak. The other detector set at 210 nm generates peaks for all 3 compounds, but only methscopolamine is within the recorder range; the other 2 compounds are exceedingly off scale. If it is not feasible or desirable to arrange 2 UV absorbance detectors in series, separate determinations can be made, one for the first 2 compounds and the other for the third component of the mixture. Two commercial samples of tablets and 2 commercial samples of capsules were analyzed by the proposed method. Recovery studies were also conducted with amounts of the 3 compounds ranging from 80 to 120% of the quantities present in the sample solutions.

Для цитирования: Cieri Uco R. Determination of phenylephrine hydrochloride, chlorpheniramine maleate, and methscopolamine nitrate in tablets or capsules by liquid chromatography with two UV absorbance detectors in series.. Journal of AOAC International. 2006.

Предметные рубрики MeSH

Подготовка и перевод публикации
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

Тип публикации указан по данным источника. Уровень доказательности автоматически не присваивается.