MedElevator Войти в исследования
← Поиск публикаций

DOI 10.1016/j.watres.2023.120355

Медицинская библиотека · Water research · 2023

Effective reduction and recovery of As(III) and As(V) from alkaline wastewater by thiourea dioxide: Efficiency and mechanism.

Zhu Feng, Kong Linghao, He Mengchang, Fang Duxian, Hu Xingyun, Peng Xianjia

СтатьяПеревод в очереди

Аннотация

For alkaline wastewater with high arsenic concentration, the traditional lime precipitation inevitably produces large amounts of hazardous waste. Herein, a heat-activated reduction method employing thiourea dioxide (TDO) as the reductant was proposed to efficiently remove and recover As(III)/As(V) from alkaline wastewater in the form of valuable As(0). More than 99.9% of As(III)/As(V) (2-400 mM) were reduced to As(0) with a high purity of more than 99.5 wt% by TDO within 30 min. The highly reductive eaq- and SO2- radical generated during TDO decomposition contribute to the arsenic reduction, and the contribution ratios of eaq- and SO2- radical were estimated to be approximately 57.6% and 42.4% for As(III) removal and 62.2% and 37.8% for As(V) removal, respectively. The arsenic reduction was greatly improved by increasing pH and temperature, which could accelerate the cleavage of C-S bond in TDO for the eaq- and SO2- formation. The presence of dissolved oxygen, which can not only scavenge eaq-/SO2- but also directly oxidize SO22-, had a negative effect on the arsenic removal. The presence of CO32- slightly suppressed the arsenic removal due to the eaq- scavenging effect while SiO32-, PO43-, Cl-, SO42- and NH4+ had negligible effects. The proposed method was a potential technology for the efficient removal and reduction of arsenic in alkaline wastewater.

Для цитирования: Zhu Feng, Kong Linghao, He Mengchang, Fang Duxian, Hu Xingyun, Peng Xianjia. Effective reduction and recovery of As(III) and As(V) from alkaline wastewater by thiourea dioxide: Efficiency and mechanism.. Water research. 2023. DOI: 10.1016/j.watres.2023.120355.

Предметные рубрики MeSH

Подготовка и перевод публикации
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

Тип публикации указан по данным источника. Уровень доказательности автоматически не присваивается.