Preparation, characterization, and application of magnetic activated carbon for treatment of biologically treated papermaking wastewater.

In view of the urgent need for tertiary treatment of papermaking wastewater and the difficulty in separating powdered activated carbon (PAC) from water, the magnetic activated carbon (33%-MPAC, 50%-MPAC and 67%-MPAC) were prepared by chemical coprecipitation method for adsorption of biologically treated papermaking wastewater (BTPW). A series of characterization of MPAC and PAC were carried out and show that the content of iron oxides is negatively related to the proportion of micropores in MPAC. The loaded iron oxides is mainly the mixture of magnetite and maghemite, and the maximum saturation magnetization of MPAC can reach 29.68 emu/g. Batch mode experiments were performed, and found that the adsorption effect of MPAC is slightly worse than that of PAC, the adsorption capacity of COD in MPAC can reach about 65 mg/g, and pH = 2 and 10 °C are more favorable for adsorption. The adsorption isotherms and kinetics were well fitted by the Freundlich model and pseudo-second-order kinetic model, respectively. The selective adsorption was studied by using the excitation emission matrix (EEM) fluorescence spectrum and high-performance size exclusion chromatography (HPSEC). It is concluded that all adsorbents are preferred to adsorb humic acid-like substances (HA). And all adsorbents are preferred to adsorb low apparent molecular weight substances (LAMW, AMW < 1500 Da), with the increase of iron oxides content, the phenomenon of MPAC preferentially adsorbed LAMW became less obvious.