The reusing of waste bio-oil as additive on enhanced urea-based selective non-catalytic reduction denitrification.

Pyrolysis polygeneration has been proven to be effective in solid waste recycling, while cleaner production is hindered by nitrogen oxide emissions and waste oil utilization. In this study, waste bio-oil was proposed as additive for promoting urea-based selective non-catalytic reduction (SNCR) denitrification efficiency to establish bio-oil reusing process and the influence of waste bio-oil on promoting SNCR denitrification were investigated. Then the effects of temperature, bio-oil components and fly ash on SNCR denitrification characteristics were explored. The results illustrated that 5 wt% bio-oil additives would widen the optimum denitrification temperature window by 24.8 % (from 210.25 to 262.43 °C), reduce the reduction temperature by 62.11 °C (from 944.04 to 881.93 °C), and increase the denitrification efficiency by 21 %. Among the main components in waste bio-oil, acetic acid was more effective than phenol and furfural in promoting SNCR denitrification under 900 °C, a large amount of OH was produced to promote the reduction of NH3 and HNCO. In addition, the existence of fly ash could promote urea oxidation and reduce denitrification efficiency because of the catalytic effect of CaO and Fe2O3 on urea oxidation.