Removal of aqueous cyanide with strongly basic ion-exchange resin.

The removal of cyanide (CN-) from aqueous solutions using a strongly basic ion-exchange resin, Purolite A-250, was investigated. The effects of contact time, initial CN- concentration, pH, temperature, resin dosage, agitation speed, and particle size distribution on the removal of CN- were examined. The adsorption equilibrium data fitted the Langmuir isotherm very well. The maximum CN- adsorption capacity of Purolite A-250 was found to be 44 mg CN- g(-1) resin. More than 90% CN- adsorption was achieved for most CN- solutions (50, 100, and 200 mg CN- L(-1)) with a resin dose of 2 g L(-1). The equilibrium time was ∼20 min, optimum pH was 10.0-10.5, and optimum agitation speed was 150 rpm. An increase in adsorption of CN- with increasing resin dosage was observed. Adsorption of CN- by the resin was marginally affected (maximum 4% variation) within an environmentally relevant temperature range of 20-50 °C. Fixed-bed column (20.5 mm internal diameters) experiments were performed to investigate the effects of resin bed depth and influent flow rate on breakthrough behaviour. Breakthrough occurred in 5 min for 0.60 cm bed depth while it was 340 min for 5.40 cm bed depth. Adsorption capacity was 25.5 mg CN- g(-1) for 5 mL min(-1) flow rate and 3.9 mg CN- g(-1) for 20 mL min(-1) flow rate. The research has established that the resin can be effectively used for CN- removal from aqueous solutions.