MedElevator Войти в исследования
← Поиск публикаций

DOI 10.2166/wst.2018.486

Медицинская библиотека · Water science and technology : a journal of the International Association on Water Pollution Research · 2019

Synthesis of porous pig bone char as adsorbent for removal of DBP precursors from surface water.

Wongrueng Aunnop, Rakruam Pharkphum, Siri Alongorn, Siyasukh Adisak

СтатьяПеревод в очереди

Аннотация

This research study aims to investigate the efficiency of synthesized porous pig bone char (PBC) for reduction of disinfection by-product (DBP) precursors from surface water. Dissolved organic matter (DOM) is commonly present in natural water and acts as a disinfection by-product precursor. Adsorption is one of the promising technologies that is commonly applied for DOM removal. Interestingly, the properties of pig bone are such that it has a surface area and pore volumes that can adsorb DOM. Pig bone was synthesized as porous bone char (PBC). The results show that synthesized PBC at 900 °C (PBC-900 °C) provides a high volume of mesoporous structure. The adsorption process was best fitted with the pseudo-second-order and Freundlich isotherm model. Thus, the mechanisms occurred on the multilayer adsorption of the surface. PBC-900 °C can remove approximately 70-80% of DOM with varying concentrations, from 0.2 g/L to 0.8 g/L. Furthermore, the results of fluorescence excitation-emission (FEEM) showed that humic acids and humic-like substances in water can be removed by using PBC at concentrations higher than 0.4 g/L. From the obtained results, it can be concluded that PBC is an alternative low-cost adsorbent which can be utilized for reduction of DBP precursors from water.

Для цитирования: Wongrueng Aunnop, Rakruam Pharkphum, Siri Alongorn, Siyasukh Adisak. Synthesis of porous pig bone char as adsorbent for removal of DBP precursors from surface water.. Water science and technology : a journal of the International Association on Water Pollution Research. 2019. DOI: 10.2166/wst.2018.486.

Предметные рубрики MeSH

Подготовка и перевод публикации
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

Тип публикации указан по данным источника. Уровень доказательности автоматически не присваивается.