MedElevator Войти в исследования
← Поиск публикаций

DOI 10.1021/es104250j

Медицинская библиотека · Environmental science & technology · 2011

Characterization of hydrophobic hypercrosslinked polymer as an adsorbent for removal of chlorinated volatile organic compounds.

Long Chao, Liu Peng, Li Ying, Li Aimin, Zhang Quanxing

СтатьяПоддержка исследования: вне правительства СШАПеревод в очереди

Аннотация

A hydrophobic hypercrosslinked polymer with poly (4-tert-butylstyrene-styrene-divinylbenzene) matrix (LC-1) was prepared as adsorbent for the removal of volatile organic compounds from gas streams. The content of oxygen-containing functional groups of LC-1 was about one-fourth that of commercial hypercrosslinked polymeric adsorbent (NDA-201). The results of the water vapor adsorption experiment indicated that LC-1 had a more hydrophobic surface than NDA-201. Three chlorinated volatile organic compounds (trichloroethylene, trichloromethane, and 1, 2-dichloroethane) were used to investigate the adsorption characteristics of LC-1 under dry and humid conditions. Equilibrium adsorption data in dry streams showed that LC-1 had good adsorption abilities for three chlorinated VOCs due to its abundant micropore structure. Moreover, the presence of water vapor in the gas stream had negligible effect on breakthrough time of three chlorinated VOCs adsorption onto LC-1 when values of relative humidity were equal to or below 50%; the breakthrough time of three chlorinated VOCs decreased less than 11% even if the relative humidity was 90%. Taken together, it is expected that LC-1 would be a promising adsorbent for the removal of VOCs vapor from the humid gas streams.

Для цитирования: Long Chao, Liu Peng, Li Ying, Li Aimin, Zhang Quanxing. Characterization of hydrophobic hypercrosslinked polymer as an adsorbent for removal of chlorinated volatile organic compounds.. Environmental science & technology. 2011. DOI: 10.1021/es104250j.

Предметные рубрики MeSH

Подготовка и перевод публикации
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

Тип публикации указан по данным источника. Уровень доказательности автоматически не присваивается.