DOI 10.3109/02656736.2015.1107760
Output-limiting symptoms induced by radiofrequency hyperthermia. Are they predictable?
Аннотация
BACKGROUND
During radiofrequency (RF) hyperthermia treatment, hot-spot phenomena may occur and prevent treatment continuation if the output is not lowered. We previously reported a significant correlation between the initial energy output at which output-limiting symptoms occurred and patient status. Patients with a complete clinical response had significantly increased temperature, while some patients with partial clinical response and stable disease had increased temperature, depending on the occurrence of output-limiting symptoms. To predict the initial energy output at which output-limiting symptoms occur, we performed multiple regression analysis with the parameters of patients' physical status.
MATERIALS AND
METHODS
Hyperthermia alone or concomitant with chemotherapy and/or radiotherapy was applied in 62 patients with malignant disease for a total of 310 treatments with a Thermotron RF-8 between December 2011 and April 2014.
RESULTS
No output-limiting symptoms were shown in 65.5% of 310 treatments. Pain (29.7%), micturition desire (1.9%), skin discomfort (0.6%), subcutaneous induration (1.6%), cold sensation (0.6%), and nausea (0.3%) were reported in the 310 treatments. A good predictive equation for initial energy output at which output-limiting symptoms occur was determined with two parameters, initial time of an output-limiting symptom onset, and thickness of the fat of the abdominal wall. Multiple regression analysis showed an adjusted R(2 )= 0.99 and variance inflation factor < 2.
CONCLUSIONS
We present a good predictive equation for initial energy output at which output-limiting symptoms occur. It is critical to prevent RF hyperthermia-induced output-limiting symptoms and establish new prevention strategies.
Предметные рубрики MeSH
Подготовка и перевод публикации
Обработка статьи · этапы, ошибки и управление
Ошибки и ограничения
История · было → стало
Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.
Тип публикации указан по данным источника. Уровень доказательности автоматически не присваивается.