Electrochemical Screening of Tungsten Trioxide-Nickel Oxide Thin Film Combinatorial Library at Low Nickel Concentrations.

The electrochemical behavior of a tungsten trioxide-nickel oxide (WO3-NiO) thin film library was investigated using scanning droplet cell microscopy (SDCM) in 0.1 mol dm-3 sodium perchlorate (NaClO4) solution. The WO3-Ni film library was deposited by thermal coevaporation on an indium tin oxide (ITO)-coated glass substrate in an atomic Ni concentration range from 2.8 to 15.6 at. %. After an oxidation/crystallization heat treatment, the Ni was oxidized and the crystal structure of WO3-NiO was transformed from monoclinic WO3 (3.5 at. % Ni) to cubic WO3 (up to 7.1 at. % Ni) and again to monoclinic WO3 when the Ni amount increased (>11.8 at. %). Proton (H+) intercalation (cathodic reaction) and deintercalation (anodic reaction) into the WO3-NiO mixed phases was induced. Electrochemical impedance spectroscopy (EIS) and Mott-Schottky (M-S) analysis revealed that the WO3-NiO film has n-type bilayer capacitive property, with the outer capacitive layer having a higher defect density than the inner capacitive layer. With a Ni concentration of 7.1 at. %, the WO3-NiO film was the most defective in the library. Introduction of the Ni cation into the WO3 network was associated with changes of the semiconducting properties of the film.