Efficient removal of Cr(III)-organic complexes from water using UV/Fe(III) system: Negligible Cr(VI) accumulation and mechanism.

Most available processes are incapable of removing Cr(III)-organic complexes from water due to their high solubility, extremely slow decomplexation rate, and possible formation of more toxic Cr(VI) during oxidation. Herein, we proposed a new combined process, i.e., UV/Fe(III) followed by alkaline precipitation (namely UV/Fe(III)+OH), to achieve highly efficient and environmentally benign removal of Cr(III)-organic complexes from water. The combined process could remove Cr(III)-citrate from 10.4 mg Cr/L to 0.36 mg Cr/L and ∼60% total organic carbon as well. More attractively, negligible Cr(VI) (<0.06 mg/L) was formed during the process. In the viewpoint of mechanism, the added Fe(III) generates ·OH radicals to transform Cr(III) into Cr(VI) and simultaneously released the citrate ligand to form Fe(III)-citrate simultaneously. Then, the photolysis of Fe(III)-citrate under UV irradiation involved the citrate degradation and the production of massive Fe(II) species, which in turn transformed the formed Cr(VI) back to Cr(III). The free metal ions, including Cr(III), Fe(II) and Fe(III) were removed by the subsequent alkaline precipitation. Also, the combined process is applicable to other Cr(III) complexes with EDTA, tartrate, oxalate, acetate. The applicability of the combined process was further demonstrated by treating two real tanning effluents, resulting in the residual Cr(III) below 1.5 mg/L (the discharge standard of China) and negligible formation of Cr(VI) (<0.004 mg/L) as well. In general, the combined process has a great potential for efficient removal of Cr(III) complexes from contaminated waters.