Optimization of dispersive liquid-liquid microextraction for the selective determination of trace amounts of palladium by flame atomic absorption spectroscopy.

A new simple and reliable method for rapid and selective extraction and determination of the trace levels of Pd(2+) ion was developed by dispersive liquid-liquid microextraction preconcentration and flame atomic absorption spectrometry detection. In the proposed approach, thioridazine HCl (TRH) was used as a Pd(2+) ion selective complexing agent. The effective parameters on the extraction recovery were studied and optimized utilizing two decent optimization methods; factorial design and central composite design (CCD). Through factorial design the best efficiency of extraction acquired using ethanol and chloroform as dispersive and extraction solvents respectively. CCD optimization resulted in 1.50 mL of dispersive solvent; 0.15 mL of extraction solvent; 0.45 mg of TRH and 250 mg of potassium chloride salt per 5 mL of sample solution. Under the optimum conditions the calibration graph was linear over the range 100-2000 microgL(-1). The average relative standard deviation was 0.7% for five repeated determinations. The limit of detection was 90 microg L(-1). The average enrichment factor and recovery reached 45.7% and 74.2% respectively. The method was successfully applied to the determination of trace amounts of palladium in the real water samples.