Flushing control strategies to improve the stability of a biogas slurry drip irrigation system: Behavioral characteristics and mechanisms.

Biogas slurry drip irrigation can mitigate environmental pollution and reduce the use of chemical fertilizers to enable sustainable development. However, the stability of the biogas slurry drip irrigation system (BSDIS) is disrupted by emitter clogging; hence, it is essential to explore the flushing control strategy of BSDIS. By means of combining actual measurement and simulation, this study investigates the BSDIS stability based on the three technical parameters of the flushing control strategy. Appropriate flushing control strategies can improve system stability and cause spatial differences on the drip irrigation tape. Under various flushing control strategies, the system stability primarily undergoes delays, sensitivity, and ineffectiveness of flushing with time. Compared with the without flushing and emitter outlet downward-oriented treatment, the optimal flushing combination (the high frequency flushing + emitter outlet upward-oriented treatment) reduces the emitter clogging content by approximately 70.97% and increases system stability by 189.1%. In the internal hydrodynamics, the laying direction of emitters does not change the movement characteristics of water flow, although the clogging particles do not completely follow the water flow, with some particles settling owing to gravity, thereby clotting the emitters. When clogging occurs, the increase in flushing speed is conducive to the increase in turbulent kinetic energy on the inlet surface of the emitter, which facilitate the flushing of clogged substances. This study proposes optimal flushing strategy parameters along with a new management mode for the waste liquid represented by biogas slurry.