Journal of oral rehabilitation · 1993
Effects of post-curing by heat on the mechanical properties of visible-light cured inlay composites.
Сравнительное исследованиеСтатьяНазвание и аннотация: Перевод в очереди
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…
Ошибки и ограничения
История · было → стало
Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.
Khan A M, Satou N, Shintani H, Taira M, Wakasa K, Yamaki M
Аннотация
The aim of this study was to evaluate the effects of post-curing by heat on the mechanical properties of visible-light (V-L) cured three inlay composites and three posterior filling composites. One group was only photo-cured according to the manufacturers' recommended methods, while the other group was heat-treated at 100 degrees C for 15 min following initial cure by V-L. Knoop hardness, diametral tensile strength and compressive strength were measured to evaluate the mechanical properties. Cure performance was checked out by the solvent immersion test. Upon secondary-curing by heat, it was confirmed that the mechanical properties of the composites were increased moderately and the cure performance of the composites was also improved.