Fortschritte der Kieferorthopadie · 1993
[The bonding strength of silane-coated metal brackets with different adhesives].
Сравнительное исследованиеАннотация на английскомСтатьяНазвание и аннотация: Перевод в очереди
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…
Ошибки и ограничения
История · было → стало
Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.
Nergiz I, Akin N
Аннотация
The aim of this study was to test under thermo stress the effect of various adhesives on the bonding strength of brackets with a new retention mechanism in comparison to brackets with a conventional retentive basis. In the test 17 different adhesives and metal brackets with two different retention mechanisms were used. One group of metal brackets was coated by means of the Kulzer silane coating procedure and the other had a mesh basis. The latter served as the control group. Both were held in place by adhesives and their bonding strength tested. The following conclusions were drawn: 1. Both of the bracket types demonstrated the highest bonding strength with the mixed composites (paste/paste). 2. The silane coated bracket bases demonstrated altogether higher bonding strength than the mesh brackets, but the difference with the light-cured and the epoxy-adhesives was only statistically significant.