Nanofiltration based water reclamation from tannery effluent following coagulation pretreatment.

Coagulation-nanofiltration based integrated treatment scheme was employed in the present study to maximize the removal of toxic Cr(VI) species from tannery effluents. The coagulation pretreatment step using aluminium sulphate hexadecahydrate (alum) was optimized by response surface methodology (RSM). A nanofiltration unit was integrated with this coagulation pre-treatment unit and the resulting flux decline and permeate quality were investigated. Herein, the coagulation was conducted under response surface-optimized operating conditions. The hybrid process demonstrated high chromium(VI) removal efficiency over 98%. Besides, fouling of two of the tested nanofiltration membranes (NF1 and NF3) was relatively mitigated after feed pretreatment. Nanofiltration permeation fluxes as high as 80-100L/m(2)h were thereby obtained. The resulting permeate stream quality post nanofiltration (NF3) was found to be suitable for effective reuse in tanneries, keeping the Cr(VI) concentration (0.13mg/L), Biochemical Oxygen Demand (BOD) (65mg/L), Chemical Oxygen Demand (COD) (142mg/L), Total Dissolved Solids (TDS) (108mg/L), Total Solids (TS) (86mg/L) and conductivity levels (14mho/cm) in perspective. The process water reclaiming ability of nanofiltration was thereby substantiated and the effectiveness of the proposed hybrid system was thus affirmed.