Calcium oxide modification of activated sludge as a low-cost adsorbent: Preparation and application in Cd(II) removal.

In this study, a simple to produce, low-cost and environment-friendly sludge based adsorbent, prepared from municipal dewatered sludge and modified by calcium oxide (CaO), is described. The enhancement effect of CaO modification on the adsorption capacity and mechanical strength of sludge based adsorbents (CaO-SA), and the modification mechanism of CaO on activated sludge are discussed. Also, the Cd(II) adsorption conditions are optimized using surface optimization experiment. The results indicated that CaO had a good effect on improving the adsorption capacity and mechanical strength of the sludge-based adsorbent. The CaO-SA adsorbent showed best performance with respect to the mechanical strength and Cd(II) adsorption capacity when prepared under 5% CaO dosage and 60 °C drying temperature. CaO modification can increase the specific surface area and calcium ion content of the sludge-based adsorbent and remove the proton of the carboxylic acid in the sludge. The Box-Behnken experimental design results revealed that the importance of operating conditions for CaO-SA adsorption of Cd(II) can be arranged in the order of adsorption time > dosage> pH> temperature. The results also indicated that the interactions between adsorption time and CaO-SA dosage, adsorption time and pH, adsorption time and temperature are all important factors affecting the Cd(II) adsorption. The optimal conditions (adsorption time of 90 min, CaO-SA dosage of 1 g/L, pH of 5 and adsorption temperature of 40 °C) for CaO-SA to adsorb Cd(II) were obtained by surface optimization, at which the Cd(II) adsorption rate could reach a value of 99.74%.