MedElevator Войти в исследования
← Поиск публикаций

DOI 10.1016/j.chemosphere.2015.12.136

Медицинская библиотека · Chemosphere · 2016

Effects of HRT and water temperature on nitrogen removal in autotrophic gravel filter.

Xu Jing-hang, He Sheng-bing, Wu Su-qing, Huang Jung-Chen, Zhou Wei-li, Chen Xue-chu

СтатьяПоддержка исследования: вне правительства СШАПеревод в очереди

Аннотация

Organic Carbon added to low ratio of carbon to nitrogen (C/N ratio) wastewater to enhance heterotrophic denitrification performance might lead to higher operating costs and secondary pollution. In this study, sodium thiosulfate (Na2S2O3) was applied as an electron donor for a gravel filter (one kind of constructed wetland) to investigate effects of hydraulic retention time (HRT) and water temperature on the nitrate removal efficiency. The results show that with an HRT of 12 h, the average total nitrogen (TN) removal efficiencies were 91% at 15-20 °C and 18% at 3-6 °C, respectively. When HRT increased to 24 h, the average TN removal increased accordingly to 41% at 3-6 °C, suggesting denitrification performance was improved by extended HRT at low water temperatures. Due to denitrification, 96% of added nitrate nitrogen (NO3(-)-N) was converted to nitrogen gas, with a mean flux of nitrous oxide (N2O) was 0.0268-0.1500 ug m(-2) h(-1), while 98.86% of thiosulfate was gradually converted to sulfate throughout the system. Thus, our results show that the sulfur driven autotrophic denitrification constructed wetland demonstrated an excellent removal efficiency of nitrate for wastewater treatment. The HRT and water temperature proved to be two influencing factors in this constructed wetland treatment system.

Для цитирования: Xu Jing-hang, He Sheng-bing, Wu Su-qing, Huang Jung-Chen, Zhou Wei-li, Chen Xue-chu. Effects of HRT and water temperature on nitrogen removal in autotrophic gravel filter.. Chemosphere. 2016. DOI: 10.1016/j.chemosphere.2015.12.136.

Предметные рубрики MeSH

Подготовка и перевод публикации
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

Тип публикации указан по данным источника. Уровень доказательности автоматически не присваивается.