MedElevator Войти в исследования
← Поиск публикаций

DOI 10.1016/j.biortech.2024.130548

Медицинская библиотека · Bioresource technology · 2024

Thiosulfate/FeCl3 pre-treatment enhances short-chain fatty acid production and mitigates H2S generation during anaerobic fermentation of waste activated sludge: Performance, microbial community and ecological analyses.

Cheng Boyi, Zhang Da, Lin Qingshan, Zhou Lichang, Jiang Jinqi, Bi Xinqi, Jiang Wei, Zan Feixiang, Wang Zongping, Chen Guanghao, Guo Gang

СтатьяПеревод в очереди

Аннотация

Anaerobic fermentation (AF) has been identified as a promising method of transforming waste activated sludge (WAS) into high-value products (e.g., short-chain fatty acids (SCFAs)). This study developed thiosulfate/FeCl3 pre-treatment and investigated the effects of different thiosulfate/FeCl3 ratios (S:Fe = 3:1, 3:2, 1:1, 3:4 and 3:5) on SCFA production and sulfur transformation during the AF of WAS. At a S:Fe ratio of 1:1, the maximal SCFA yield (933.3 mg COD/L) and efficient H2S removal (96.5 %) were obtained. S:Fe ratios ≤ 1:1 not only benefited hydrolysis and acidification but largely mitigated H2S generation. These results were supported by the enriched acidogens and reduced sulfur-reducing bacteria (SRB). Molecular ecological network analysis further revealed that the keystone taxon (g_Saccharimonadales) was found in S:Fe = 1:1, together with reductions in associations among methanogens, acidogens and SRB. This work provides a strategy for enhancing high-value product recovery from WAS and minimising H2S emissions.

Для цитирования: Cheng Boyi, Zhang Da, Lin Qingshan, Zhou Lichang, Jiang Jinqi, Bi Xinqi, Jiang Wei, Zan Feixiang, Wang Zongping, Chen Guanghao, Guo Gang. Thiosulfate/FeCl3 pre-treatment enhances short-chain fatty acid production and mitigates H2S generation during anaerobic fermentation of waste activated sludge: Performance, microbial community and ecological analyses.. Bioresource technology. 2024. DOI: 10.1016/j.biortech.2024.130548.

Предметные рубрики MeSH

Подготовка и перевод публикации
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

Тип публикации указан по данным источника. Уровень доказательности автоматически не присваивается.