Carboxymethylated Lignin Reinforcement of SPI Adhesive: Enhancing Strength, Antimicrobial, and Flame-Retardant Properties without Excessive Alkali Introduction.

To address the challenges associated with formaldehyde emissions in engineered wood adhesives and simultaneously enhance adhesive properties related to water resistance, fire resistance, and mold resistance, a novel environmentally sustainable biomass-based adhesive was formulated. In this work, kraft lignin was carboxymethylated and then blended with the soy protein isolate (SPI)-based adhesive, the dry and wet shear strength of the plywood bonded by the resultant adhesive was enhanced from 1.10 and 0.63 MPa to 1.73 and 1.23 MPa, respectively, resulting in improvements of 157% and 195%. Carboxymethylated lignin (CML) significantly improved the mold resistance and flame-resistance residual rate of the adhesive and decreased the water absorption rate from 190% to 108%. Furthermore, the adhesive exhibits outstanding flame-retardancy, with self-extinguishing capability rendering it suitable for industrial production. In addition, we also evaluated the performances of resulting adhesives cured with different diepoxides and triepoxides, and the comparisons of the adhesive in this work to commercial urea glue and soy protein-based adhesives were conducted. To our delight, the SPI-10CML adhesive presented comparable or even improved performances, showing its promising practical applications such as for fire doors.