MedElevator Войти в исследования
← Поиск публикаций

DOI 10.1136/bmjophth-2024-001661

Медицинская библиотека · BMJ open ophthalmology · 2024

IOL decentration sensitivity according to spatial frequencies.

Pieh Stefan, Artmayr Cornelia, Schartmüller Daniel, Kriechbaum Katharina

СтатьяПоддержка исследования: вне правительства СШАПеревод в очереди

Аннотация

BACKGROUND/AIMS: Investigation of the decentration sensitivity of monofocal intraocular implants with a focus on different aberration corrections depending on different spatial frequencies.

METHODS

Using an optical bench, the decentration sensitivities of an intraocular lens (IOL) with a high spherical aberration correction of -0.27 µm (ZCB00 Johnson & Johnson), an IOL with an aberration correction of -0.20 µm (Primus HD OphthalmoPro) and an IOL with an aberration neutral design (CT Asphina 409MP Carl Zeiss Meditec) were evaluated for Strehl ratio values and for 25, 50 and 100 lp/mm. Two different corneas with +0.13 µm and +0.28 µm were used. The lenses were tested in the best centration and up to a decentration of 0.5 mm.

RESULTS

Decentration sensitivity affects high spatial frequencies more than lower ones. The possible decentration sensitivity is determined by the amount of spherical aberration of the cornea. The effective decentration sensitivity is determined by the extent to which these spherical aberrations are compensated. If these are not compensated, there is hardly any decentration sensitivity.

CONCLUSION

High spatial frequencies are more affected by decentration sensitivity. The decentration sensitivity of an IOL is determined by the extent to which the spherical aberration of the cornea is corrected.

Для цитирования: Pieh Stefan, Artmayr Cornelia, Schartmüller Daniel, Kriechbaum Katharina. IOL decentration sensitivity according to spatial frequencies.. BMJ open ophthalmology. 2024. DOI: 10.1136/bmjophth-2024-001661.

Предметные рубрики MeSH

Подготовка и перевод публикации
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

Тип публикации указан по данным источника. Уровень доказательности автоматически не присваивается.