MedElevator Войти в исследования
← Поиск публикаций

DOI 10.1002/chem.202402855

Медицинская библиотека · Chemistry (Weinheim an der Bergstrasse, Germany) · 2024

N-doped Porous Carbon Derived from the Pyrolysis of a Polydopamine-coated Hypercross-linked Polymer for Enhanced CO2 Adsorption.

Wang Jingtao, Liu Xiaoyan, Zhou Yang, Yang Zhuhong, Tegladza Isaac D, Liu Chang

СтатьяПеревод в очереди

Аннотация

Porous carbon materials can simultaneously capture and convert carbon dioxide, helping to reduce greenhouse gas emissions and using carbon dioxide as a feedstock for the production of valuable chemicals or fuel. In this work, a series of N-doped porous carbons (PDA@HCP(x:y)-T) was prepared; the CO2 adsorption capacity of the prepared PDA@HCP(x:y)-T was enhanced by coating polydopamine (PDA) on a hypercross-linked polymer (HCP) and then adjusting the mass ratio of PDA to HCP and the carbonization temperature. The results showed that the prepared PDA@HCP(1 : 1)-850 exhibited a high CO2 adsorption capacity due to abundant micropores (0.6762 cm3/g), a high specific surface area (1220.8 m2/g), and moderate surface nitrogen content (2.75 %). Notably, PDA@HCP(1 : 1)-850 exhibited the highest CO2 uptake of 6.46 mmol/g at 0 °C and 101 kPa. Critically, these N-doped porous carbons can also be used as catalysts for the reaction of CO2 with epichlorohydrin to form chloropropylene carbonate, with chloropropylene carbonate yielding up to 64 % and selectivity of the reaction reaching 94 %. As a result, these N-doped porous carbons could serve as potential candidates for CO2 capture and conversion due to their high reactivity, excellent CO2 uptake, and good catalytic performance.

Для цитирования: Wang Jingtao, Liu Xiaoyan, Zhou Yang, Yang Zhuhong, Tegladza Isaac D, Liu Chang. N-doped Porous Carbon Derived from the Pyrolysis of a Polydopamine-coated Hypercross-linked Polymer for Enhanced CO2 Adsorption.. Chemistry (Weinheim an der Bergstrasse, Germany). 2024. DOI: 10.1002/chem.202402855.
Подготовка и перевод публикации
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

Тип публикации указан по данным источника. Уровень доказательности автоматически не присваивается.