MedElevator Войти в исследования
← Поиск публикаций

DOI 10.1080/19440049.2018.1469050

Медицинская библиотека · Food additives & contaminants. Part A, Chemistry, analysis, control, exposure & risk assessment · 2018

Detection of melamine in milk powder using MCT-based short-wave infrared hyperspectral imaging system.

Lee Hoonsoo, Kim Moon S, Lohumi Santosh, Cho Byoung-Kwan

СтатьяПеревод в очереди

Аннотация

Extensive research has been conducted on non-destructive and rapid detection of melamine in powdered foods in the last decade. While Raman and near-infrared hyperspectral imaging techniques have been successful in terms of non-destructive and rapid measurement, they have limitations with respect to measurement time and detection capability, respectively. Therefore, the objective of this study was to develop a mercury cadmium telluride (MCT)-based short-wave infrared (SWIR) hyperspectral imaging system and algorithm to detect melamine quantitatively in milk powder. The SWIR hyperspectral imaging system consisted of a custom-designed illumination system, a SWIR hyperspectral camera, a data acquisition module and a sample transfer table. SWIR hyperspectral images were obtained for melamine-milk samples with different melamine concentrations, pure melamine and pure milk powder. Analysis of variance and the partial least squares regression method over the 1000-2500 nm wavelength region were used to develop an optimal model for detection. The results showed that a melamine concentration as low as 50 ppm in melamine-milk powder samples could be detected. Thus, the MCT-based SWIR hyperspectral imaging system has the potential for quantitative and qualitative detection of adulterants in powder samples.

Для цитирования: Lee Hoonsoo, Kim Moon S, Lohumi Santosh, Cho Byoung-Kwan. Detection of melamine in milk powder using MCT-based short-wave infrared hyperspectral imaging system.. Food additives & contaminants. Part A, Chemistry, analysis, control, exposure & risk assessment. 2018. DOI: 10.1080/19440049.2018.1469050.

Предметные рубрики MeSH

Подготовка и перевод публикации
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

Тип публикации указан по данным источника. Уровень доказательности автоматически не присваивается.