Coupled substrate removal and electricity generation in microbial fuel cells simultaneously treating sulfide and nitrate at various influent sulfide to nitrate ratios.

The current work coupled simultaneous sulfide and nitrate removal in a Microbial Fuel Cell (MFC). The substrate removal and electricity generation were coupled at influent Sulfide to Nitrate molar ratios (S/N ratios) of 5:0, 5:1, 5:2 and 5:3. The sulfide concentrations used included: 60 mg S/L, 300 mg S/L, 540 mg S/L, 780 mg S/L and 1020 mg S/L. The effect of S/N ratio on the performance of substrate removal was greater at higher influent sulfide concentration. The electricity generation also varied at different influent sulfide concentrations and S/N ratios. The number of electrons generated at S/N ratio of 5:2 was the largest at any fixed influent sulfide concentration. The Pearson correlation showed that effluent sulfate concentration and nitrogen gas had significant positive correlations with steady state voltage (or electronic quantity). Moreover, the simulation models were developed to establish the relation between substrate removal and electricity generation at various S/N ratios.