MedElevator Войти в исследования
← Поиск публикаций

DOI 10.1001/archoto.2011.1204

Медицинская библиотека · Archives of otolaryngology--head & neck surgery · 2012

Disinfection of flexible fiberoptic laryngoscopes after in vitro contamination with Staphylococcus aureus and Candida albicans.

Chang Dennis, Florea Andrew, Rowe Mark, Seiberling Kristin A

СтатьяПеревод в очереди

Аннотация

OBJECTIVE

To determine the efficacy of various cleaning and disinfective methods in reducing bacterial and fungal load on flexible fiberoptic laryngoscopes (FFLs).

DESIGN

In vitro model.

SUBJECTS: Flexible fiberoptic laryngoscopes contaminated with Staphylococcus aureus and Candida albicans.

INTERVENTIONS: Contamination with S aureus and C albicans was separately induced on FFLs, which were then disinfected with different protocols: 20-, 15-, 10-, and 5-minute soaks in ortho-phthalaldehyde (Cidex OPA; Johnson & Johnson) with or without presoaking in an enzymatic soap solution for 5 minutes; an isolated 5-minute soak in an enzymatic soap solution; a 30-second wipe with antibacterial soap and water; a 30-second wipe with isopropyl alcohol; a 30-second wipe with antibacterial soap, followed by a 30-second scrub with isopropyl alcohol; and a 30-second wipe with germicidal cloth, all accompanied by previous rinsing with 30 seconds of running tap water.

RESULTS

All protocols except the isolated 5-minute soak in enzymatic soap solution were successful in completely disinfecting the FFLs after experimental contamination with S aureus or C albicans.

CONCLUSION

Various different cleaning methods appeared to properly disinfect FFLs after inoculation with S aureus and C albicans in an in vitro model.

Для цитирования: Chang Dennis, Florea Andrew, Rowe Mark, Seiberling Kristin A. Disinfection of flexible fiberoptic laryngoscopes after in vitro contamination with Staphylococcus aureus and Candida albicans.. Archives of otolaryngology--head & neck surgery. 2012. DOI: 10.1001/archoto.2011.1204.

Предметные рубрики MeSH

Подготовка и перевод публикации
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

Тип публикации указан по данным источника. Уровень доказательности автоматически не присваивается.