Simultaneous removal of cyanobacterial blooms and production of clean water by coupling flocculation with a rotary drum filter.

A mechanical harvesting technology based on coupling flocculation with a rotary drum filter (RDF, 35-μm) was applied to remove cyanobacterial blooms and produce clean water in Lake Caohai, a sub-lake of Lake Dianchi (Kunming, China). After treatment with a shipboard RDF and cationic polyacrylamide (CPAM, 0.5-2 mg/L) flocculation, > 95% of cyanobacterial biomass was removed. The chlorophyll-a (Chl-a) concentration and turbidity in the effluent were < 8 μg/L and < 3 NTU, respectively. Nutrient concentrations were also markedly reduced, with a permanganate index (PI) of < 2 mg/L and total phosphorus concentration of < 20 μg/L. The total nitrogen concentration was reduced from 2.75 to 1.65 mg/L, and most of the residual nitrogen was nitrate. Although powerful for the removal of suspended particles and an enhanced water transparency, the combined technology showed no significant reduction in inorganic nutrients and only a slight reduction in dissolved organic matter (DOM). The concentrations of protein and polysaccharide were significantly reduced, while that of humic matter did not change during the process. After flushing with the effluent of the RDF, a 20,000-m3 enclosure of lake water became clear when the volume of the effluent was 1.8 times that of the water enclosure. The electrical energy per order (EE/O) was calculated to be 0.053kWh/m3, which is lower than that of transferring water from more than 10 km away (0.058 kWh/m3). Thus, a shipboard RDF coupled with CPAM flocculation is a promising approach to remove harmful cyanobacterial blooms and improve the water environment of eutrophic lakes.