Feasibility of using the Leap Motion Controller to administer conventional motor tests: a proof-of-concept study.

Although upper-limb movement impairments are common, the primary tools for assessing and tracking impairments in clinical settings are limited. Markerless motion capture (MMC) technology has the potential to provide a large amount of quantitative, objective movement data in routine clinical use. Many past studies have focused on whether MMC are sufficiently accurate. However, another necessary step is to create meaningful clinical tests that can be administered via MMC in a robust manner. Four conventional upper-limb motor tests common in clinical assessments (visually guided movement, finger tapping, postural tremor, and reaction time) were modified so they can be administered via a particular MMC sensor, the Leap Motion Controller (LMC). In this proof-of-concept study, we administered these modified tests to 100 healthy subjects and present here the successes and challenges we encountered. Subjects generally found the LMC and the graphical user interfaces of the tests easy to use. The LMC recorded movement with sufficiently high sampling rate (>106 samples/s), and the rate of LMC malfunctions (mainly jumps in time or space) was low, so only 1.9% of data was discarded. However, administration of the tests also revealed some significant weaknesses. The visually guided movement test was easily implemented with the LMC; the modified reaction time test worked reasonably well with the LMC but is likely more easily implemented with other existing technologies; and the modified tremor and finger tapping tests did not work well because of the limited bandwidth of the LMC. Our findings highlight the need to develop and evaluate motor tests specifically suited for MMC. The real strength of MMC may not be in replicating conventional tests but rather in administering new tests or testing conditions not possible with conventional clinical tests or other technologies.