Technical and Economic Comparison between Sodium and Ammonium Agents in the Jarosite Precipitation Process-An Evaluation for Industrial Applications.

Iron content can cause severe challenges through zinc production from zinc sulfide concentrate. The zinc industry extensively uses the jarosite precipitation process (JPP) to precipitate dissolved iron and remove it before transferring the solution to downstream stages. Precipitating agents (PAs) play an essential role in the JPP. However, surprisingly, no study compares the efficiency of various PAs on an industrial scale. As an innovative approach, this investigation compares the technical and economic aspects of using various sodium and ammonium compounds (hydroxides, carbonates, bicarbonates, sulfates, and bisulfates) as typical PAs for the JPP at the Bafgh Zinc Smelting Company (BZSC) plant. Experimental results revealed that ammonium hydroxide, with 90.85% iron removal efficiency, had the highest performance, and sodium bisulfate and ammonium bisulfate had the lowest efficiency (74.54 and 77.13%, respectively). However, since ammonium hydroxide is a corrosive PA, it is not a promising alternative to sodium sulfate (with both economic and safety issues). Based on technical and economic assessments, sodium carbonate (84.31% iron removal efficiency) showed the highest potential for an efficient JPP.