A programmable and reconfigurable microfluidic chip.

This article reports an original concept enabling the rapid fabrication of continuous-flow microfluidic chips with a programmable and reconfigurable geometry. The concept is based on a digital microfluidic platform featuring an array of individually addressable electrodes. A selection of electrodes is switched on sequentially to create a de-ionized (DI) water finger specific pattern, while the surrounding medium consists of liquid-phase paraffin. The water displacement is induced by both electrowetting on dielectric and liquid dielectrophoresis phenomena. Once the targeted DI water pattern is obtained, the chip temperature is lowered by turning on an integrated thermoelectric cooler, forming channel structures made of solidified paraffin with edges delimitated by the DI water pattern. As a result, the chip can be used afterwards to conduct in-flow continuous microfluidic experiments. This process is resettable and reversible by heating up the chip to melt the paraffin and reconfigure the microchannel design on demand, offering the advantages of cost, adaptability, and robustness. This paper reports experimental results describing the overall concept, which is illustrated with typical and basic fluidic geometries.