The Journal of prosthetic dentistry · 2011
Effects of soldering and laser welding on bond strength of ceramic to metal.
СтатьяНазвание и аннотация: Перевод в очереди
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…
Ошибки и ограничения
История · было → стало
Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.
Aladağ Akin, Cömlekoğlu M Erhan, Dündar Mine, Güngör M Ali, Artunç Celal
Аннотация
STATEMENT OF PROBLEM: Welding or soldering of metal frameworks negatively affects the overall bond strength between the veneering ceramic and metal.
PURPOSE: The purpose of this study was to evaluate the effect of soldering and laser-welding procedures on the bond strength between ceramic and metal.
MATERIAL AND METHODS: Thirty Ni-based metal specimens (Wiron 99) (8 × 4 × 4 mm) were fabricated and divided into 3 groups; soldered (S), laser welded (L), and control (untreated cast alloy) (n=10). In S and L specimens, a notch (1 × 1.5 mm) was prepared longitudinally on the surface of each specimen and filled with compatible alloy (Wiron soldering rods and Wiroweld NC, respectively). Vickers hardness measurements were made after polishing the surfaces with a metallographic polishing kit. A veneering ceramic (VITA VMK 95) was vibrated, condensed in a mold, and fired on the metal frameworks. The specimens were sectioned in 2 axes to obtain nontrimmed bar specimens with a bonding area of approximately 1 mm². Forty bars per block were obtained. Each bar was subjected to microtensile bond strength (μTBS) testing with a crosshead speed of 1 mm/min. The μTBS data (MPa) were recorded, and SEM was used for failure analysis of the tested bars. The measurements were statistically analyzed using a 1-way ANOVA and Tamhane tests (α=.05).
RESULTS: The mean differences in μTBS of veneering ceramic to soldered (10.4 ±2.4 MPa) and laser-welded (11.7 ±1.3 MPa) metal surfaces were not significantly different and were significantly lower than that of the cast alloy (25.4 ±3.6 MPa) (P<.05). The mean Vickers hardness of cast alloy was significantly higher (236 ±17 HV) than soldered (114 ±9 HV) and laser-welded groups (129 ±11 HV) (P<.05).
CONCLUSIONS: Soldering and laser welding significantly decreased the μTBS of a veneering ceramic to a base metal alloy.
PURPOSE: The purpose of this study was to evaluate the effect of soldering and laser-welding procedures on the bond strength between ceramic and metal.
MATERIAL AND METHODS: Thirty Ni-based metal specimens (Wiron 99) (8 × 4 × 4 mm) were fabricated and divided into 3 groups; soldered (S), laser welded (L), and control (untreated cast alloy) (n=10). In S and L specimens, a notch (1 × 1.5 mm) was prepared longitudinally on the surface of each specimen and filled with compatible alloy (Wiron soldering rods and Wiroweld NC, respectively). Vickers hardness measurements were made after polishing the surfaces with a metallographic polishing kit. A veneering ceramic (VITA VMK 95) was vibrated, condensed in a mold, and fired on the metal frameworks. The specimens were sectioned in 2 axes to obtain nontrimmed bar specimens with a bonding area of approximately 1 mm². Forty bars per block were obtained. Each bar was subjected to microtensile bond strength (μTBS) testing with a crosshead speed of 1 mm/min. The μTBS data (MPa) were recorded, and SEM was used for failure analysis of the tested bars. The measurements were statistically analyzed using a 1-way ANOVA and Tamhane tests (α=.05).
RESULTS: The mean differences in μTBS of veneering ceramic to soldered (10.4 ±2.4 MPa) and laser-welded (11.7 ±1.3 MPa) metal surfaces were not significantly different and were significantly lower than that of the cast alloy (25.4 ±3.6 MPa) (P<.05). The mean Vickers hardness of cast alloy was significantly higher (236 ±17 HV) than soldered (114 ±9 HV) and laser-welded groups (129 ±11 HV) (P<.05).
CONCLUSIONS: Soldering and laser welding significantly decreased the μTBS of a veneering ceramic to a base metal alloy.
Предметные рубрики MeSH
Aluminum OxideCarbon Compounds, InorganicChromium AlloysDental AlloysDental BondingDental Casting InvestmentDental EtchingDental PolishingDental PorcelainDental SolderingDental Stress AnalysisDental VeneersElastic ModulusElasticityHardnessHumansLasers, Solid-StateMaterials TestingMetal Ceramic AlloysMicroscopy, Electron, ScanningNickelSilicon CompoundsStress, MechanicalSurface PropertiesTemperatureTensile Strength