Two reconstructive techniques for flatfoot deformity comparing contact characteristics of the hindfoot joints.

The effect of two different methods of reconstruction of flatfoot deformity and the role of the posterior tibial tendon on the contact characteristics of the hindfoot joints were quantified using pressure-sensitive film. Each of 10 cadaver feet was loaded quasi-statically by an axial compressive force to simulate varying loads. First, a specimen was tested intact, then it was tested after sectioning the spring ligament and loading the specimen cyclically to create one type of flatfoot deformity. It was then tested again after reconstructing the deformity. Reconstructions used were the Dillwyn-Evans procedure (bone graft in osteotomy of the calcaneus) or the calcaneocuboid distraction arthrodesis (CCDA). We found that surgically produced flatfoot deformity altered mainly the talonavicular joint, by decreasing its contact area. The Dillwyn-Evans method had less effect on the talonavicular joint (altering 2 of 6 measured parameters) than the CCDA (3 of 6) and more effect on the anteriomedial facet (altering 3 of 6 parameters) than the CCDA (1 of 6). The Dillwyn-Evans method had more effect on the posterior facet (altering 2 of 6 measured parameters) than the CCDA (1 of 6). Function of the posterior tibial tendon had no effect on contact characteristics of the hindfoot joints after either type of reconstruction. These findings are based on measurements using a quasi-statically-loaded foot model at three selected positions, and results may be different with dynamic loading.