MedElevator Войти в исследования
← Поиск публикаций

DOI 10.1039/c2em30512g

Медицинская библиотека · Journal of environmental monitoring : JEM · 2012

The effect of humic acid on uranyl sorption onto bentonite at trace uranium levels.

Ivanov Peter, Griffiths Tamara, Bryan Nick D, Bozhikov Gospodin, Dmitriev Serguei

СтатьяПоддержка исследования: вне правительства СШАПеревод в очереди

Аннотация

The effect of humic acid (HA) on U(VI) sorption on bentonite was studied in batch experiments at room temperature and ambient atmosphere at a (237)U(VI) concentration of 8.4 × 10(-11) M and HA concentration of 100 mg L(-1). The distribution of U(VI) between the liquid and solid phases was studied as a function of pH and ionic strength both in the absence and presence of HA. It was shown that the uranyl sorption on bentonite is strongly dependent on pH and the presence of humics, and the effect of the addition order was negligible. In the absence of HA an enhancement in the uptake with increasing pH was observed and a sharp sorption edge was found to take place between pH 3.2 and 4.2. The presence of HA slightly increases uranium(VI) sorption at low pH and curtails it at moderate pH, compared to the absence of HA. In the basic pH range for both the presence and absence of HA the sorption of uranium is significantly reduced, which could be attributed to the formation of soluble uranyl carbonate complexes. The influence of ionic strength on U(VI) and HA uptake by bentonite were investigated in the range of 0.01-1.0 M, and while there was an enhancement in the sorption of humic acid with increasing ionic strength, no significant effect of the ionic strength on the U(VI) sorption was observed in both the absence and presence of HA.

Для цитирования: Ivanov Peter, Griffiths Tamara, Bryan Nick D, Bozhikov Gospodin, Dmitriev Serguei. The effect of humic acid on uranyl sorption onto bentonite at trace uranium levels.. Journal of environmental monitoring : JEM. 2012. DOI: 10.1039/c2em30512g.

Предметные рубрики MeSH

Подготовка и перевод публикации
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

Тип публикации указан по данным источника. Уровень доказательности автоматически не присваивается.