MedElevator Войти в исследования
← Поиск публикаций

DOI 10.2186/jpr.jpr_d_23_00296

Медицинская библиотека · Journal of prosthodontic research · 2024

Exploring the bio-mechanical behavior of PEEK and CFR-PEEK materials for dental implant applications using finite element analysis.

Reddy Kandula Uday Kumar, Seth Aqshat, Vuppuluri Amol, Verma Piyush Chandra, Narala Suresh Kumar Reddy, Babu Polavarapu Jayakrishna, Saravanan Prabakaran

СтатьяПеревод в очереди

Аннотация

PURPOSE: This study explored the bio-mechanical properties of polyether ether ketone (PEEK) and carbon fiber reinforced-PEEK (CFR-PEEK) as potential alternatives to traditional dental implant materials, such as titanium (Ti) and zirconia (ZrO2). Conventional implant materials often exhibit stress shielding leading to peri-implant bone loss and implant failure.

STUDY SELECTION: Finite element analysis using a three-dimensional computer-aided-design (3D CAD) model of the jawbone with various implant materials (titanium, zirconia, PEEK, and CFR-PEEK) incorporated was implemented to assess the effectiveness of PEEK and CFR-PEEK. Two loading conditions (50 and 100 N) were applied in centric (case-1) and eccentric (case-2) to mimic the oral loading conditions.

RESULTS

Titanium and zirconia implants were found to exhibit higher levels of stress shielding and therefore pose greater risks of bone loss and implant failure. Conversely, CFR-PEEK implants demonstrated more-uniform stress distributions that reduce the likelihood of stress shielding compared to their conventional counterparts; consequently, CFR-PEEK implants are particularly suitable for load-bearing applications. Furthermore, maximum strain values on PEEK-implanted cortical bone reached a state of adaptation, referred to as the "lazy zone" in which bone growth and bone loss rates are equal, indicating PEEK's potential for a long-term implant utilization.

CONCLUSIONS

PEEK and CFR-PEEK implants are promising alternatives to conventional dental implants because they provide stress shielding and promote bone health. Improved stress distribution enhances long-term success and durability while mitigating complications, and highlights their applicability to dental implant procedures.

Для цитирования: Reddy Kandula Uday Kumar, Seth Aqshat, Vuppuluri Amol, Verma Piyush Chandra, Narala Suresh Kumar Reddy, Babu Polavarapu Jayakrishna, Saravanan Prabakaran. Exploring the bio-mechanical behavior of PEEK and CFR-PEEK materials for dental implant applications using finite element analysis.. Journal of prosthodontic research. 2024. DOI: 10.2186/jpr.jpr_d_23_00296.

Предметные рубрики MeSH

Подготовка и перевод публикации
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

Тип публикации указан по данным источника. Уровень доказательности автоматически не присваивается.