Chemiresistive sensing of volatile organic compounds with films of surfactant-stabilized gold and gold-silver alloy nanoparticles.

Here we describe the chemiresistive sensing of volatile organic compounds (VOCs) with films of chemically synthesized approximately 4 nm diameter Au and AuAg alloy nanoparticles (NPs) stabilized by a surfactant, tetraoctylammonium bromide (TOABr). The chemiresistive sensing properties were measured over a concentration range of 100 to 0.04% saturation for methanol (MeOH), ethanol (EtOH), 2-propanol (IPA), and toluene (Tol) vapor analytes and compared directly to the chemiresistive sensing properties of films of 1.6 nm diameter hexanethiolate (C6S)-coated Au monolayer-protected clusters (MPCs). Films of TOABr-stabilized Au NPs exhibit the opposite response compared to those of C6S-coated Au MPCs. The details are unclear, but the mechanism likely involves changes in capacitive charging in the film or improved conductive pathways through the Au NPs upon incorporation of VOCs into the film for the former as opposed to the well-known change in electron hopping conductivity for the latter. This leads to a decrease in resistance in the presence of VOCs for TOABr Au as opposed to an increase for C6S Au. The TOABr Au sensors are more sensitive, especially for polar analytes, and have greater long-term stability compared to C6S Au. The limit of detection (LOD) for films of TOABr-coated Au NPs is 3, 2, 12, and 37 ppm for IPA, MeOH, EtOH, and Tol, respectively, as compared to 106, 326, 242, and 48 for C6S Au. Films of TOABr-stabilized AuAg alloy NPs exhibit the same type of response, but the sensitivity decreases dramatically with increasing Ag content, showing that the metal composition of the NPs in the film plays a role in the sensing properties, which has not been well-recognized in the literature.