UV-LED/chlorine degradation of propranolol in water: Degradation pathway and product toxicity.

This study reports on the propranolol (PRO) degradation performance and product toxicity of an ultraviolet light-emitting diode (UV-LED)/chlorine process. The effects of experimental parameters including solution pH, chlorine dosage, and water matrix constituents on PRO removal were evaluated. Up to 94.5% of PRO could be eliminated within 15 min at a PRO-to-chlorine molar ratio of 1:4. The overall removal efficiency of PRO was non-pH dependent in the range of 5-9, while the initial rate was accelerated under alkaline conditions. The presence of Cl-/HCO3- had little influence on the PRO degradation, whereas either humic acid or NO3- had an obvious inhibitory effect. Radical scavenger experiments showed that both HO and Cl primarily contributed to the PRO degradation, and electron paramagnetic resonance data demonstrated the generation of 1O2. The transformation of PRO during this process led to five detected products, which exhibited a higher acute toxicity than the parent compound according to the bright luminescent bacillus T3 method. It is worth mentioning that under the same ultraviolet illumination intensity, the degradation of PRO under UV-LED/chlorine gave a better performance than UV254/chlorine, but the EEO of the former is obviously higher than the latter. So further research is required on improving the electric current to photon conversion efficiency for UV-LED. Additionally, the UV-LED/chlorine system was effective in the degradation of other drugs including sulfamethoxazole, oxytetracycline hydrochloride, and gatifloxacin, suggesting the possible application of the UV-LED/chlorine process for the removal of pharmaceuticals during wastewater treatment.