MedElevator Войти в исследования
← Поиск публикаций

DOI 10.3390/dj14070414

Медицинская библиотека · Dentistry journal · 2026

Lateral Wall Failure During Implant Osteotomy Preparation in a Standardized Narrow-Ridge Model: Osseodensification Versus Conventional Drilling-An Ex Vivo Controlled Study.

Nikolic Radomir, Vulovic Jelena, Bojovic Milan, Ilic Gavrilo, Kravanja Andrej, Gabric Dragana, Tatic Zoran

СтатьяПеревод в очереди

Аннотация

Background

The aim of this ex vivo study was to compare the resistance to lateral wall failure during sequential implant site preparation using osseodensification (OD) burs and conventional rotary drills in a standardized narrow ridge model. The primary outcome was the drill diameter at first lateral wall perforation. Secondary outcomes included paired perforation occurrence at a clinically relevant diameter (4.0 mm) and perforation morphology (length and width).

Methods

Twenty standardized trabecular bone blocks were prepared in a paired within-specimen design, with each block receiving two osteotomies: one prepared using conventional rotary drills and the other using OD burs. Osteotomy diameter was sequentially increased according to the manufacturers' protocols until lateral wall perforation occurred. The drill diameter at first perforation was recorded. Perforation morphology (length and width) was quantified using high-resolution extraoral digital scanning and software-based measurements. Statistical analysis was performed using paired non-parametric tests (α = 0.05).

Results

OD burs significantly delayed lateral wall perforation compared with conventional drills (median 4.30 vs. 4.00 mm; p = 0.0000171). At the 4.0 mm drill step, perforation occurred in 16/20 (80%) conventional versus 2/20 (10%) OD preparations (p = 0.0013). Perforation length was significantly greater with conventional drilling (p = 0.000681), while no significant difference was observed for perforation width (p = 0.073).

Conclusions

Within the limits of this decorticated trabecular ex vivo model, OD increased resistance to lateral wall failure, delayed perforation onset, and reduced perforation length compared with conventional drilling.

Для цитирования: Nikolic Radomir, Vulovic Jelena, Bojovic Milan, Ilic Gavrilo, Kravanja Andrej, Gabric Dragana, Tatic Zoran. Lateral Wall Failure During Implant Osteotomy Preparation in a Standardized Narrow-Ridge Model: Osseodensification Versus Conventional Drilling-An Ex Vivo Controlled Study.. Dentistry journal. 2026. DOI: 10.3390/dj14070414.
Подготовка и перевод публикации
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

Тип публикации указан по данным источника. Уровень доказательности автоматически не присваивается.