Optimized microbial fuel cell-powered electro-Fenton processes to enhance electricity and bisphenol A removal by varying external resistance and electrolyte concentrations.

This study is the first to investigate the effects of external resistance and electrolyte concentration on the performance of a bioelectro-Fenton (BEF) system, involving measurements of power density, H2O2 generation, and bisphenol A (BPA) removal efficiency. With optimized operating conditions (external resistance of 1.12 kΩ and cathodic NaCl concentration of 1,657 mg/L), the BEF system achieved a maximum power density of 38.59 mW/m2, which is about 3.5 times higher than with 1 kΩ external resistance and no NaCl. This system featured a 71.7 % reduction in total internal resistance. The optimized BEF also accelerated the oxygen reduction reaction rate, increasing H2O2 generation by 4.4 times compared to the unoptimized system. Moreover, it exhibited superior BPA degradation performance, removing over 99 % of BPA within 14 hs, representing a 1.1 to 3.3-fold improvement over the unoptimized BEF. By the fifth cycle (70 h), the optimized BEF still removed 70 % of BPA. Optimizing the operating conditions significantly increased the abundance of electrochemically active bacteria (Pseudomonadaceae) from 2.2 % to 20 %, facilitating rapid acclimation. The study demonstrates the strong potential of an optimized BEF system for removing persistent pollutants.