MedElevator Войти в исследования
← Поиск публикаций

DOI 10.1016/j.jhazmat.2018.11.081

Медицинская библиотека · Journal of hazardous materials · 2018

Evaluation on the removal performance of dichloromethane and toluene from waste gases using an airlift packing reactor.

Xu Peilun, Wei Yang, Cheng Nana, Li Sujing, Li Wei, Guo Tianjiao, Wang Xiangqian

СтатьяПоддержка исследования: вне правительства СШАПеревод в очереди

Аннотация

Biological removal of dichloromethane (DCM) from pharmaceutical industry is limited by its recalcitrance. In this study, an airlift packing reactor (ALPR), which combined the suspended and fixed-film microbial growth system, was set up to remove DCM and co-existed toluene. The removal performance of the ALPR for DCM was greater than traditional airlift reactor (ALR). The maximum elimination capacity (ECmax) of the ALPR for DCM reached 108 g m-3 h-1 with removal efficiency (RE) of 41%, increased by 145% if compared to the ALR. The ECmax for toluene was 172 g m-3 h-1 with RE of 70%, decreased by 25% if compared to the ALR, which was mainly due to the higher liquid-phase biomass in the ALR. The results of high-throughput sequencing showed that the microbial composition on the packings of the ALPR had a large difference from its liquid-phase or the liquid-phase of the ALR. Gemmobacter, Rhizomicrobium, Chitinophaga, Vampirovibrio, and Fodinicurvata were genera with great abundance fixed on the packings and Rhizomicrobium, Chitinophaga, Vampirovibrio, and Fodinicurvata are first to be reported in VOCs biological removal. This study indicated that the ALPR can augment the microbial community and effectively improve the removal of recalcitrant VOCs.

Для цитирования: Xu Peilun, Wei Yang, Cheng Nana, Li Sujing, Li Wei, Guo Tianjiao, Wang Xiangqian. Evaluation on the removal performance of dichloromethane and toluene from waste gases using an airlift packing reactor.. Journal of hazardous materials. 2018. DOI: 10.1016/j.jhazmat.2018.11.081.
Подготовка и перевод публикации
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

Тип публикации указан по данным источника. Уровень доказательности автоматически не присваивается.