Construction of a cellulose-based high-performance adhesive with a crosslinking structure bridged by Schiff base and ureido groups.

Biomass-based adhesives are considered to be the preferred alternative to formaldehyde-type wood adhesives due to their wide range of sources, low cost, and sustainability. Herein, an environmentally friendly Schiff base cross-linked compact three-dimensional network structure bio-adhesive (DAC-PEI-U) derived from polyethyleneimine (PEI), urea, and cellulose was successfully prepared, verifying by detailed FTIR, NMR, and XPS analysis. Schiff base bridging between aldehyde groups in dialdehyde cellulose (DAC) and amino groups in polyurea (PEIU) not only constructed crosslinking networks but also endowed adhesives with good adhesion property. The dry bond strength of DAC-PEI-U adhesive reached 2.71 MPa, and the wet shear strength was 1.51 MPa (hot water) and 1.34 MPa (boiling water), respectively. It not only improves the water resistance and bonding process, but also displays simple synthesis and low cost. The improved performance of DAC-PEI-U adhesive is attributed to the generation of hyperbranched cross-linking structure in the adhesive system, which results in increased cross-linking density and promotes the formation of dense cross-sections in the curing adhesive. This work paves a solid way for developing cellulose-based wood adhesives with wet bonding properties, thus holding great potential as an alternative to formaldehyde-type adhesives in wood-based panel and indoor panel bonding industries.